Enhanced humification via lignocellulosic pretreatment in remediation of agricultural solid waste.

Stover and manure are the main solid waste in agricultural industry. The generation of stover and manure could lead to serious environmental pollution if not handled properly. Composting is the potential greener solution to remediate and reduce agricultural solid waste, through which stover and manure could be remediated and converted into organic fertilizer, but the long composting period and low efficiency of humic substance production are the key constraints in such remediation approach. In this study, we explore the effect of lignocellulose selective removal on composting by performing chemical pretreatment on agricultural waste followed by utilization of biochar to assist in the remediation by co-composting treatment and reveal the impacts of different lignocellulose component on organic fertilizer production. Aiming to discover the key factors that influence humification during composting process and improve the composting quality as well as comprehensive utilization of agricultural solid waste. The results demonstrated that the removal of selective lignin or hemicellulose led to the shift of abundances lignocellulose-degrading bacteria, which in turn accelerated the degradation of lignocellulose by almost 51.2%. The process also facilitated the remediation of organic waste via humification and increased the humic acid level and HA/FA ratio in just 22 days. The richness of media relies on their lignocellulose content, which is negatively correlated with total nitrogen content, humic acid (HA) content, germination index (GI), and pH, but positively correlated with fulvic acid (FA) and total organic carbon (TOC). The work provides a potential cost effective and efficient framework for agricultural solid waste remediation and reduction.

Preparation of Highly Energetic Coordination Compounds with Rich Oxidants and Lower Sensitivity Based on Methyl Groups.

Revamping the structure of energy storage is an efficient strategy for striking a balance between the performance and sensitivity of energetic materials to achieve high energy and reduced sensitivity. In continuation of prior research, this study utilized the ligand 3,5-dimethyl-1H-pyrazole-4-carbonhydrazide (DMPZCA) and innovatively designed and synthesized the compound ECCs [Cu(HDMPZCA)2(ClO4)2](ClO4)2·2H2O (ECCs-1·2H2O). Compared with the former research, solvent-free compound ECCs-1 refers to an innovative material characterized by a dual structure involving ionic salts and coordination compounds. Due to these unique structures, ECCs-1 exhibits an increased [ClO4-] content, a higher oxygen balance constant (OB = -7.9%), and improved mechanical sensitivity (IS = 8 J, FS = 32 N). Theoretical calculations support the superior detonation performance of ECCs-1. Additionally, experimental results confirm its ignition capability through lower-threshold lasers and highlight the outstanding initiation potential and explosive power, making it a suitable candidate for primary explosives.

Regulating the Coordination Environment by Using Isomeric Ligands: Enhancing the Energy and Sensitivity of Energetic Coordination Compounds.

Transforming the energy storage structure is an effective approach to achieve a balance between the detonation performance and the sensitivity of energetic compounds, with a goal of high energy and low sensitivity. Building upon previous work, this study employed an isomeric compound 1H-pyrazole-3-carbohydrazide (3-PZCA) as a ligand and creatively designed the energetic coordination compound (ECC) Ag(3-HPZCA)2(ClO4)3 (ECC-1). It is a novel material with a dual structure of ionic salts and coordination compounds, which represents the first report of such a structure in Ag(I)-based ECCs. With its unique structures, ECC-1 exhibits a larger [ClO4-] content, a higher oxygen balance constant (OB = 0%), and superior mechanical sensitivity (IS = 13 J and FS = 40 N). Theoretical calculations indicate that ECC-1 has a higher detonation performance compared to previous work. Furthermore, the explosive experiment testing results demonstrate that it can be ignited by lower-threshold lasers and possesses excellent initiation capability and explosive power, making it suitable not only as a primary explosive but also as a secondary explosive.

Serum Metabolomics Analysis of Skin-Involved Systemic Lupus Erythematosus: Association of Anti-SSA Antibodies with Photosensitivity.

Purpose: Systemic lupus erythematosus is a heterogeneous autoimmune disease in which skin involvement is a common manifestation. It is currently thought that the photosensitivity of SLE skin involvement is associated with anti-SSA antibodies. This study aimed to expand the current state of knowledge surrounding the molecular pathophysiology of SLE skin photosensitivity through Serum metabolomics analysis. Patients and Methods: The serum metabolites of 23 cases of skin-involved SLE (SI) group, 14 cases of no SI (NSI) group, and 30 cases of healthy controls (HC) were analyzed by using UPLC-MS/MS technology, and subgroup analysis was performed according to the expression of anti-SSA antibodies in SI. MetaboAnalyst 5.0 was used for enrichment analysis and ROC curve construction, identifying serum metabolic markers of skin-involved SLE associated with anti-SSA antibodies. Results: We identified several metabolites and metabolic pathways associated with SLE photosensitivity. Two metabolites, SM (d18:1/24:0) and gamma-CEHC can distinguish between anti-SSA antibody-positive and negative SI, with AUC of 0.829 and 0.806. These two photosensitization-related substances may be potential markers of skin involvement in SLE associated with anti-SSA antibody. Conclusion: This study provides new insights into the pathogenesis of SI patients, and provides a new molecular biological basis for the association between anti-SSA antibodies and skin photoallergic manifestations of SLE.

Optimization of performance and sensitivity: preparation of two Ag(I)-based ECPs by using isomeric ligands.

For energetic compounds, their structure determines their performance, and even minor variations in their structure can have a significant impact on their performance. The application scenarios for energetic materials are diverse, and their performance requirements vary as well. To investigate the influence of different substituent positions on the performance of primary explosives, we prepared two Ag(I)-based complexes, [Ag(2-IZCA)ClO4]n (ECPs-1) and [Ag(4-IZCA)ClO4]n (ECPs-2), using structurally isomeric ligands, 1H-imidazole-2-carbohydrazide (2-IZCA) and 1H-imidazole-4-carbohydrazide (4-IZCA). The structures were confirmed using infrared, elemental analysis, and single-crystal X-ray diffraction. Experimental results demonstrate that both ECPs exhibit good thermal stability. However, compared to ECPs-1, ECPs-2 exhibits a lower thermal initial decomposition temperature (Td = 210 °C), lower mechanical sensitivity (IS = 27 J, FS = 84 N), and more concentrated energy output. Although theoretical predictions suggest similar detonation velocities and pressures for both compounds, actual detonation performance tests indicate that ECPs-2 has stronger explosive power and initiating capability, with potential for use as a laser initiator (E = 126 mJ). The simple preparation method and inexpensive starting materials enrich the research on primary explosives.

LncRNA Functional Screening in Organismal Development.

Controversy continues over the functional prevalence of long non-coding RNAs (lncRNAs) despite their being widely investigated in all kinds of cells and organisms. In animals, lncRNAs have aroused general interest from exponentially increasing transcriptomic repertoires reporting their highly tissue-specific and developmentally dynamic expression, and more importantly, from growing experimental evidence supporting their functionality in facilitating organogenesis and individual fitness. In mammalian testes, while a great multitude of lncRNA species are identified, only a minority of them have been shown to be useful, and even fewer have been demonstrated as true requirements for male fertility using knockout models to date. This noticeable gap is attributed to the virtual existence of a large number of junk lncRNAs, the lack of an ideal germline culture system, difficulty in loss-of-function interrogation, and limited screening strategies. Facing these challenges, in this review, we discuss lncRNA functionality in organismal development and especially in mouse testis, with a focus on lncRNAs with functional screening.

Structural, vibrational and electronic properties of nitrogen-rich 2,4,6-triazide-1,3,5-triazine under high pressure.

CONTEXT AND RESULTS: 2,4,6-triazide-1,3,5-triazine (TAT) has received widespread attention for its great potential to synthesize or convert to nitrogen-rich high energy density materials (HEDMs). The TAT structure alteration in the compression process up to 30 GPa has characteristics as follows: (a) [N3] groups straighten; (b) [N3] groups gather toward the six-membered C-N heterocycles. At about 5 GPa, Raman peak split at 700 cm-1 was observed both in calculation and in-situ Raman experiment, which is caused by pressure-induced intramolecular stress. Besides, the broad band of the amorphous two-dimensional C=N network (centered at 1630 cm-1) occurred at about 12 GPa. Meantime, the study on electronic features suggests the pressure-induced deformation in TAT molecular structure cause the discontinuous change of band gap at about 4.5 GPa and 8.0 GPa, respectively. COMPUTATIONAL AND THEORETICAL TECHNIQUES: The static compression process of TAT was explored in the range of 0-30 GPa by using dispersion corrected density functional theory (DFT-D) calculations combined with in-situ Raman experiment. The GGA/PBE+G06 method that has less errors than other calculation methods was used to predict the geometry structure, vibrational properties and electronic structure of TAT under pressure.

Dataset of bimanual human-to-human object handovers.

We present a multi-sensor dataset of bimanual human-to-human object handovers. The dataset consists of 240 recordings obtained from 12 pairs of participants performing bimanual object handovers with 10 objects, and 120 recordings obtained from the same 12 pairs of participants performing unimanual handovers with 5 of those objects. Each recording includes the giver and receiver's 13 upper-body bone position and orientation trajectories, position trajectories for the 27 markers placed on their upper bodies, object position and orientation trajectories, and two RGB-D data streams. The motion trajectories are recorded at 120Hz and the RGB-D streams are recorded at 30Hz. The recordings are annotated with the three handover phases: reach, transfer, and retreat. The dataset also includes four anthropometric measurements of the participants: height, waistline height, arm span, and weight. Our dataset could help investigations of the bimanual reaching motions and grasps utilized by humans while performing handovers. Also, it can be used to train robots to perform bimanual object handovers with humans.

Preparation of High-Energy ECPs by Retaining the Coordination Ability of Carbohydrazide Groups.

In order to preserve the coordinating ability of the hydrazide group, we used retrosynthetic analysis to design and synthesize ligand furan-2,5-dicarbohydrazide and its complex [Cu(FDCA)(H2O)ClO4]n(ClO4)n·nH2O (ECPs-1·H2O). The structure of the product was confirmed by single-crystal X-ray diffraction, infrared spectroscopy, and elemental analysis. The solvent-free target material ECPs-1 exhibited good thermal stability, sensitivity to mechanical stimuli, and excellent explosive properties. Furthermore, it had good potential for laser ignition and comparable detonation power to LA. The simple preparation method and inexpensive starting materials enriched the research on primary explosives.

Preparation of Primary Explosive by Self-assembly of Combustible and Oxidizing Agents under Acid.

In order to further explore the effect of ligands on the performance of primary explosives and gain a deeper understanding of the coordination mechanism, we designed furan-2-carbohydrazide (FRCA), a ligand, by using oxygen-containing heterocycles and carbohydrazide. Then, FRCA and Cu(ClO4)2 were used to synthesize coordination compounds [Cu(FRCA)2(H2O)(ClO4)2]·CH3OH (ECCs-1·CH3OH) and Cu(FRCA)2(H2O)(ClO4)2 (ECCs-1). The structure of the ECCs-1 was confirmed by single-crystal X-ray diffraction, IR and EA characterization. Further experiments on ECCs-1 show that ECCs-1 has good thermal stability, but is sensitive to mechanical stimuli (impact sensitivity = IS = 8 J, friction sensitivity = FS = 20 N). The predicted value of the detonation parameter is DEXPLO 5 = 6.6 km s-1, PEXPLO 5 = 18.8 GPa, but the ignition test, laser test, and lead plate detonation experiment show that ECCs-1 has excellent detonation performance, which is very worthy of attention.

Fermentation quality, bacterial community, and predicted functional profiles in silage prepared with alfalfa, perennial ryegrass and their mixture in the karst region.

There is little information regarding the dynamics of fermentation products and the bacterial community in silage prepared with alfalfa (MS), perennial ryegrass (LP), and their mixture in the karst region. In this study, we explored the effects of combining MS with LP in different ratios (100% MS, 70% MS + 30% LP, 50% MS + 50% LP, 30% MS + 70% LP and 100% LP; fresh matter basis) on silage chemical composition, fermentation quality, bacterial communities and predicted functions during the ensiling process. Each treatment was prepared in triplicate and stored at room temperature (22-25°C) for 7, 15, and 45 days. The dry matter (DM) and water-soluble carbohydrate content of the silages increased as the LP proportion in the mixed silage increased; at 45 days, the 70% MS + 30% LP, 50% MS + 50% LP and 30% MS + 70% LP silages contained higher (p < 0.05) CP content than the 100% MS and 100% LP silages. The 30% MS + 70% LP and 100% LP silages exhibited lower (p < 0.05) pH and higher (p < 0.05) LA content than the other silages; at 45 days, none of the silages contained PA or BA. As fermentation proceeded, the abundance of harmful (Enterobacteriaceae and Sphingomonas) and beneficial (Lentilactobacillus, Lactiplantibacillus, Secundilactobacillus, and Levilactobacillus) microorganisms decreased and increased, respectively, as the LP proportion in the mixed silage increased. The predicted functional distribution of microbial communities and metabolic pathways revealed that the 30% MS + 70% LP and 100% LP silages had a stronger capacity for fermentation and a weaker capacity for nitrate reduction than the other silages. Moreover, as the fermentation proceeded, the 30% MS + 70% LP and 100% LP treatments enhanced the functions of "Metabolism," "Genetic information processing" and "Organismal systems" at level 1, the functions of "Amino acid metabolism" and "Nucleotide metabolism" at level 2, and the functions of "Metabolic pathways," "Biosynthesis of secondary metabolites," "Biosynthesis of antibiotics" and "Purine metabolism" at level 3. Thus, adding LP could improve the fermentation quality of MS silage by changing the composition and metabolic function of microbes; furthermore, ensiling 30% alfalfa with 70% ryegrass can produce high-quality silage in the karst region.

A Method of Green Citrus Detection in Natural Environments Using a Deep Convolutional Neural Network.

The accurate detection of green citrus in natural environments is a key step in realizing the intelligent harvesting of citrus through robotics. At present, the visual detection algorithms for green citrus in natural environments still have poor accuracy and robustness due to the color similarity between fruits and backgrounds. This study proposed a multi-scale convolutional neural network (CNN) named YOLO BP to detect green citrus in natural environments. Firstly, the backbone network, CSPDarknet53, was trimmed to extract high-quality features and improve the real-time performance of the network. Then, by removing the redundant nodes of the Path Aggregation Network (PANet) and adding additional connections, a bi-directional feature pyramid network (Bi-PANet) was proposed to efficiently fuse the multilayer features. Finally, three groups of green citrus detection experiments were designed to evaluate the network performance. The results showed that the accuracy, recall, mean average precision (mAP), and detection speed of YOLO BP were 86, 91, and 91.55% and 18 frames per second (FPS), respectively, which were 2, 7, and 4.3% and 1 FPS higher than those of YOLO v4. The proposed detection algorithm had strong robustness and high accuracy in the complex orchard environment, which provides technical support for green fruit detection in natural environments.

Correlation and genetic analysis of seed shell thickness and yield factors in Tartary buckwheat (Fagopyrum tataricum (L.) Gaertn.).

In order to solve the difficult problem of the outer shell covering in the processing of Tartary buckwheat, we conducted a genetic analysis in segregating F2 and F3 populations derived from a hybrid between 'Yunqiao No. 1' and 'Rice buckwheat', and the F3 population was used to analyze the phenotypic and genetic correlation among the traits. The results showed that the variety with a value of trait for seed shell thickness over 0.20 mm is a hard-shelled type (The thick shell type = seed shell rate > 20%), and that with a value of trait for seed shell thickness below 0.15 mm is a easily-shelled type (The thin shell type = seed shell rate < 20%), while that with a value of trait for seed shell thickness ranging from 0.15 mm to 0.20 mm is a hard-shelled type or easily-shelled type. In addition, alleles for traits of number of seed per plant and total seed weight per plant have larger dominance variance relative to their additive variance, indicating that genes controlling these traits have larger dominant effects, it is not suitable for the selection of single plant in offspring plants at the early stage of development, because these traits do not show up then. The alleles for traits of 1000 kernel weight and seed shell thickness have larger additive variance relative to their dominant variance, indicating that genes governing these traits have greater additive effects, with which the single plant can be selected in the progeny at the early stage of development. Although, the value of seed shell thickness has been shown to correlated positively with that of 1000 kernel weight, almost all the seeds of easily-shelled type are those with thin shell. However, ideal single plants with easily-shelled trait are those with intermediate phenotypes of seed shell thickness and 1000 kernel weight, by which the traits of large number of seeds per plant and total seed weight per plant could be selected. In the progeny population of this study, there were excellent single plants with high-yield and easily-shelled traits, of which the value of seed shell thickness was 0.17 mm (0.15 mm to 0.20 mm), the value of 1000 kernel weight was 14 g, the value of number of seeds per plant was 1137 and value of total seed weight per plant was 15.9 g. The results showed that taking the hybrid combinations of easily-shelled trait with the trait of seed shell thickness was the most effective selection indexes to breed the high-yield buckwheat varieties with the trait of easy shelling.

Silicon improves maize photosynthesis in saline-alkaline soils.

The research aimed to determine the effects of Si application on photosynthetic characteristics of maize on saline-alkaline soil, including photosynthetic rate (P n ), stomatal conductance (g s ), transpiration rate (E), and intercellular CO2 concentration (C i ) of maize in the field with five levels (0, 45, 90, 150, and 225 kg · ha(-1)) of Si supplying. Experimental results showed that the values of P n, g s, and C i of maize were significantly enhanced while the values of E of maize were dramatically decreased by certain doses of silicon fertilizers, which meant that Si application with proper doses significantly increased photosynthetic efficiency of maize in different growth stages under stressing environment of saline-alkaline soil. The optimal dose of Si application in this experiment was 150 kg · ha(-1) Si. It indicated that increase in maize photosynthesis under saline-alkaline stress took place by Si application with proper doses, which is helpful to improve growth and yield of maize.

Construction of a genome-scale metabolic network of the plant pathogen Pectobacterium carotovorum provides new strategies for bactericide discovery.

We reconstructed the first genome-scale metabolic network of the plant pathogen Pectobacterium carotovorum subsp. carotovorum PC1 based on its genomic sequence, annotation, and physiological data. Metabolic characteristics were analyzed using flux balance analysis (FBA), and the results were afterwards validated by phenotype microarray (PM) experiments. The reconstructed genome-scale metabolic model, iPC1209, contains 2235 reactions, 1113 metabolites and 1209 genes. We identified 19 potential bactericide targets through a comprehensive in silico gene-deletion study. Next, we performed virtual screening to identify candidate inhibitors for an important potential drug target, alkaline phosphatase, and experimentally verified that three lead compounds were able to inhibit both bacterial cell viability and the activity of alkaline phosphatase in vitro. This study illustrates a new strategy for the discovery of agricultural bactericides.

Changes in nitrogen metabolism and antioxidant enzyme activities of maize tassel in black soils region of northeast China.

Two varieties of maize (Zea mays L.) grown in fields in black soils of northeast China were tested to study the dynamic changes of nitrogen metabolism and antioxidant enzyme activity in tassels of maize. Results showed that antioxidant enzyme activity in tassels of maize increased first and then decreased with the growing of maize, and reached peak value at shedding period. Pattern of proline was consistent with antioxidant enzyme activity, showing that osmotic adjustment could protect many enzymes, which are important for cell metabolism. Continuous reduction of soluble protein content along with the growing of maize was observed in the study, which indicated that quantitative material and energy were provided for pollen formation. Besides, another major cause was that a large proportion of nitrogen was used for the composition of structural protein. Nitrate nitrogen concentrations of tassels were more variable than ammonium nitrogen, which showed that nitrate nitrogen was the favored nitrogen source for maize.

Effects of silicon on photosynthetic characteristics of maize (Zea mays L.) on alluvial soil.

The objectives of the study were to determine the effects of silicon on photosynthetic characteristics of maize on alluvial soil, including total chlorophyll contents, photosynthetic rate (P n), stomatal conductance (g s), transpiration rate (E), and intercellular CO2 concentration (C i ) using the method of field experiment, in which there were five levels (0, 45, 90, 150, and 225 kg · ha(-1)) of silicon supplying. The results showed that certain doses of silicon fertilizers can be used successfully in increasing the values of total chlorophyll contents, P n, and g s and decreasing the values of E and C i of maize leaves, which meant that photosynthetic efficiency of maize was significantly increased in different growth stages by proper doses of Si application on alluvial soil, and the optimal dose of Si application was 150 kg · ha(-1). Our results indicated that silicon in proper amounts can be beneficial in increasing the photosynthetic ability of maize, which would be helpful for the grain yield and growth of maize.

A new Oligocene Calocedrus from South China and its implications for transpacific floristic exchanges.

PREMISE OF THE STUDY: Calocedrus is among the genera with a typical eastern Asian-western North American disjunct distribution today. The origin of its modern distribution pattern can be better understood by examining its fossil record. METHODS: The present article reports for the first time a new fossil species of this genus based on compressed material from the Oligocene Ningming Formation of Guangxi, South China, in its present major distribution area in eastern Asia. KEY RESULTS: Calocedrus huashanensis sp. nov. is most similar to the two extant eastern Asian species, C. macrolepis and C. formosana, in gross morphology of foliage shoots and bears a close resemblance to the latter in cuticle structure. It shows a general similarity to the North American fossil representatives of the genus in alternately branched foliage shoots but is clearly different from the European Paleogene species characterized by oppositely branched leafy shoots. CONCLUSIONS: This discovery provides new evidence for the floristic exchange of this genus between eastern Asia and North America before the Oligocene (most likely in the Eocene), presumably via the Bering land bridge. The flattened leafy shoots and dimorphic leaves with thin cuticle, open stomatal pits, and shallowly sunken guard cells of the present fossils suggest a rather humid climate during the Oligocene in the Ningming area, South China.

Cytokine-induced killer cells in the treatment of patients with solid carcinomas: a systematic review and pooled analysis.

BACKGROUND AIMS: The aim of this study was to evaluate the efficacy and safety of cytokine-induced killer (CIK) cell therapy for solid carcinomas. METHODS: We performed a computerized search of phase II/III clinical trial databases of CIK cell-based therapy using a combination of the terms 'cytokine-induced killer cells', 'tumor' and 'cancer'. RESULTS: Treatment with CIK cells was associated with a significantly improved half-year survival (P = 0.003), 1-year survival (P = 0.0005), 2-year survival (P < 0.01) and mean survival time (MST) (P < 0.001). Patients in the CIK group showed a prolonged half-year progression-free survival (PFS) (P < 0.01), 1-year PFS (P < 0.01) and median time to progression (MTTP) (P < 0.001). A favored disease control rate (DCR) was observed in patients receiving CIK cell therapy, while the objective response rate (ORR) was not altered (P = 0.05) compared with the non-CIK group (P = 0.007). CIK cell therapy could also reduce the adverse effects of grade III and IV leukopenia caused by chemotherapy (P = 0.002) and diminish hepatitis B virus (HBV)-DNA content (P < 0.01). However, the incidence of fever in the CIK therapy group was significantly higher than in the non-CIK group (P = 0.02). The percentage of CD3(+), CD4(+), CD4(+)CD8(+), CD3(-) CD56(+) and CD3(+) CD56(+) T-lymphocyte subsets in the peripheral blood of cancer patients was significantly increased, whereas the percentage of CD8(+) T-lymphocyte cells was significantly decreased in the CIK group compared with the non-CIK group (P < 0.01). CONCLUSIONS: CIK cell therapy has demonstrated a significant superiority in prolonging the MST, PFS, DCR and quality of life (QoL) of patients.

[Modified urethral pull-through procedure for posterior urethral stricture or atresia].

OBJECTIVE: To evaluate the feasibility and safety of the modified urethral pull-through procedure for the treatment of posterior urethral stricture or atresia. METHODS: We retrospectively analyzed 212 cases of posterior urethral stricture or atresia treated by the modified urethral pull-through procedure. The length of the stricture or atresia was 1.5 - 12 cm, and 66 cases had experienced 1 - 4 previous unsuccessful urethral repairs. Simple transperineal approach was adopted in 208 cases and transperineal-inferiorpubic approach in the other 4. And 15 of the patients underwent urethral construction with grafts. RESULTS: Satisfactory voiding was achieved in 198 (93.4%) of the patients, of whom 16 received 3 - 15 urethral dilations. Of the 14 cases that failed, 10 succeeded after a second and 2 after a third operation. Of the 15 cases that underwent substitution urethroplasty, 14 achieved satisfactory voiding, and only 1 needed repeat dilation. No serious complications were observed in any of the patients. CONCLUSION: Modified urethral pull-through procedure, with its advantages of safety, mini-invasiveness, simple operation and high success rate, is feasible for the treatment of posterior urethral stricture or atresia, while for that with the length >5 cm, substitution urethroplasty should be considered.